TRENDnet TI-PG1284i User Manual page 132

TRENDnet User's Guide
Web Configuration
General Settings
Advanced Settings > STP > General Settings
Parameter Description
Select Enabled to use Spanning Tree Protocol (STP) or Rapid
State Spanning Tree Protocol (RSTP) or Multiple Spanning Tree Protocol
(MSTP).
Selects the Spanning Tree running mode.
STP - Spanning Tree Protocol.
Mode
RSTP - Rapid Spanning Tree Protocol.
MSTP - Multiple Spanning Tree Protocol.
Configuration Parameters
Region Name Configures the region name for the Switch.
Revision Configures the revision for the Switch.
Instance Selects an instance which you want to configure.
© Copyright 2016 TRENDnet. All Rights Reserved.
Select one or more vlans which will join the instance.
VLAN
Note: the vlan will be removed from instance 0 automatically.
Instance and vlan map table
Instance The instance.
VLAN The vlan in the instance.
Action Click Delete button to delete this instance.
Bridge Parameters
Advanced Settings > STP > Bridge Parameters
Parameter Description
This is the maximum time (in seconds) the Switch will wait before
changing states. This delay is required because every switch must
Forward Time
receive information about topology changes before it starts to
forward frames. In addition, each port needs time to listen for
conflicting information that would make it return to a blocking
TI-PG1284i
129