Configure Your Switch; Access Your Switch Management Page; Switch Info; View Your Switch Status Information - TRENDnet TEG-30102WS User Manual

TRENDnet User's Guide

Configure your switch

Access your switch management page

Note: Your switch default management IP address
through the use of your Internet web browser (e.g. Internet Explorer®, Firefox®,
Chrome™, Safari®, Opera™) and will be referenced frequently in this User's Guide.
1. Open your web browser and go to the IP address http://192.168.10.200. Your switch
will prompt you for a user name and password.
2. Enter the user name and password. By default:
User Name: admin
Password: admin
Note: User Name and Password are case sensitive.
© Copyright 2018 TRENDnet. All Rights Reserved.
http://192.168.10.200 is accessed

Switch Info

View your switch status information

Switch Info
You may want to check the general system information of your switch such as firmware
version, boot loader information and system uptime. Other information includes H/W
version, RAM/Flash size, administration information, IPv4 and IPv6 information.
1. Log into your switch management page (see
on page 13).
2. Click on Switch Info.
System Information
 System Up For – The duration your switch has been running continuously without
a restart/power cycle (hard or soft reboot) or reset.
 Runtime Image: The current software or firmware version your switch is running.
 Boot Loader – The current boot loader version your switch is running.
Hardware Information
 Version: Displays your switch's hardware version.
 DRAM Size: Displays your switch's RAM memory size.
 Flash Size: Displays your switch's Flash memory size.
 Temperature: Displays your switch's current temperature
 Fan Status: Displays the status of your switch's fans
TEG-30102WS
"Access your switch management page"
8