Mail Alarm - TRENDnet TI-PG1284i User Manual

TRENDnet User's Guide
Default Settings
Auto provision configuration profile:
Active
Version
Protocol
FTP user/pwd
Folder
Server address
CLI Configuration
Node Command
enable show auto-provision
configure auto-provision
auto-provision show
auto-provision active
(enable|disable)
auto-provision server-address
IPADDR
auto-provision protocol
(tftp|http|ftp)
auto-provision FTP-user username
STRING password
STRING
auto-provision folder STRING
auto-provision no folder
© Copyright 2016 TRENDnet. All Rights Reserved.
: Disable
: 0
: FTP
: /
:
:
Description
This command displays the current auto
provision configurations.
This command enters the auto-provision
node.
This command displays the current auto
provision configurations.
This command enables/disables the auto
provision function.
This command configures the auto
provision server's IP.
The command configurations the upgrade
protocol.
The command configurations the username
and password for the FTP server.
The command configurations the folder for
the auto provision server.
The command configurations the folder to
default.
auto-provision no FTP-user
Web Configuration
Management > Auto Provision

Mail Alarm

The feature sends an e-mail trap to a predefined administrator when some events
occur. The events are listed below:

System Reboot

Port Link Change

Configuration Change
have
been updated.

Firmware Upgrade
been updated.

User Login
TI-PG1284i
The command configurations the username
and password to default.
: The system warn start or cold start.
: A port link up or down.
: The system configurations in the NV-RAM
: The system firmware image has
: A user login the system.
170