Maintenance - TRENDnet TI-PG1284i User Manual

TRENDnet User's Guide
configure mail-alarm mail-from
configure mail-alarm mail-to
configure mail-alarm server-ip
IPADDR server-port VALUE
configure mail-alarm server-ip
IPADDR server-port Default
configure mail-alarm trap-event
(reboot|link-
change|config.|
firmware|login|port-
blocked| alarm)
(disable|enable)
Web Configuration
Management > Mail Alarm
Parameter Description
State Enable / disable the Mail Alarm function.
© Copyright 2016 TRENDnet. All Rights Reserved.
This command configures the mail
sender.
This command configures the mail
receiver.
This command configures the mail
server IP address and the TCP port.
This command configures the mail
server IP address and configures 25 as
the server's TCP port.
This command disables / enables mail
trap events.
Server IP Specifies the mail server's IP address.
Server Port Specifies the TCP port for the SMTP.
Account Name Specifies the mail account name.
Account Password Specifies the mail account password.
Mail From Specifies the mail sender.
Mail To Specifies the mail receiver.
Trap State Enables / disables the mail trap event states.

Maintenance

CLI Configuration
Node Command
enable show config-
change-status
configure reboot
configure reload default-
config
configure write memory
configure archive download-
config <URL PATH>
TI-PG1284i
Description
This command displays the configurations status if
there are default values.
This command reboots the system.
This command copies a default-config file to
replace the current one.
Note: The system will reboot automatically to take
effect the configurations.
This command writes current
configurations to the configuration file.
This command downloads a new copy of
configuration file from TFTP server.
Where <URL PATH> can be:
ftp://user:pass@192.168.1.1/file
http://192.168.1.1/file
operating
172