Copyright 2016 Trendnet. All Rights Reserved - TRENDnet TI-PG1284i User Manual

TRENDnet User's Guide
Web Configuration
Basic Settings > Port Mirroring
Parameter Description
Select Enable to turn on port mirroring or select Disable to turn it
State
off.
Monitor to Port Select the port which connects to a network traffic analyzer.
Settings in this field apply to all ports.
Use this field only if you want to make some settings the same
All Ports for all ports.
Use this field first to set the common settings and then make
adjustments on a port-by-port basis.
Source Port This field displays the number of a port.
Select Ingress, Egress or Both to only copy the ingress (incoming),
egress (outgoing) or both (incoming and outgoing) traffic from the
Mirror Mode specified source ports to the monitor port. Select Disable to not
copy any traffic from the specified source ports to the monitor
port.
Apply Click Apply to take effect the settings.
© Copyright 2016 TRENDnet. All Rights Reserved.
Refresh Click Refresh to begin configuring this screen afresh.
TI-PG1284i
27