TRENDnet TI-PG1284i User Manual page 131

TRENDnet User's Guide
configure spanning-tree mst
max-age
configure no spanning-tree mst
max-age
configure spanning-tree mst
max-hops
configure no spanning-tree mst
max-hops
configure spanning-tree mst
instance STRING
priority <0-61440>
configure no spanning-tree mst
instance STRING
priority
interface spanning-tree mst
instance STRING cost
<1-200000000>
interface no spanning-tree mst
instance STRING cost
interface spanning-tree mst
instance STRING port-
priority <0-240>
interface no spanning-tree mst
instance STRING port-
priority
configure spanning-tree mst
configuration
configure no spanning-tree mst
configuration
© Copyright 2016 TRENDnet. All Rights Reserved.
This command configures the maximum age
time for the MSTP.
This command resets the maximum age time
for the MSTP.
The default maximum age time is 20 seconds.
This command configures the maximum hop
count.
This command resets the maximum hop count.
The default maximum hop count is 20.
This command resets the maximum hop count.
The default maximum hop count is 20.
This command resets the priority for the
specific instance.
This command configures a cost on the specific
port for the MSTP.
This command resets the cost on the specific
port for the MSTP.
This command configures a priority on the
specific port for the MSTP.
This command resets the priority on the
specific port for the MSTP.
This command enters the MSTP configure
node.
This command resets all of configurations for
the MSTP.
mst apply
mst instance
mst name
mst no name
mst revision
mst no revision
mst show (current |
pending)
Specifying the MST Region Configuration and Enabling MSTP
For two or more switches to be in the same MST region, they must have the same VLAN-
to-instance mapping, the same configuration revision number, and the same name. A
region can have one member or multiple members with the same MST configuration;
each member must be capable of processing RSTP BPDUs. There is no limit to the number
of MST regions in a network, but each region can support up to 16 spanning-tree
instances. You can assign a VLAN to only one spanning-tree instance at a time.
TI-PG1284I(config)#spanning-tree mst configuration
TI-PG1284I(config-mst)#name MSTP
TI-PG1284I(config-mst)#revision 1
TI-PG1284I(config-mst)#instance 1 vlan 1-10
TI-PG1284i
This command applies configurations to
current instant.
This command configures the instance and
vlan map.
This command configures a region name for
the MSTP.
This command reset the region name for the
MSTP.
This command configures the revision for the
MSTP.
This command resets the revision for the
MSTP.
This command shows the MSTP configures.
Current – the working configurations.
Pending – the not applied configurations.
128