TRENDnet TI-PG1284i User Manual page 146

TRENDnet User's Guide
Default Settings
The mac-filter age time
The maximum mac-filter entries
CLI Configuration
Node Command
enable show arp-inspection
mac-filter
configure arp-inspection mac-
filter age VALUE
configure clear arp-inspection
mac-filter
configure no arp-inspection
mac-filter mac
MACADDR vlan
VLANID
Web Configuration
Security > IP Source Guard > ARP Inspection > Filter Table
Parameter Description
Filter Age Time This setting has no effect on existing MAC address filters.
© Copyright 2016 TRENDnet. All Rights Reserved.
: 5 minutes. (0 – No age)
: 256.
Description
This command displays the current ARP
Inspection filtered MAC.
This command configures the age time for the
ARP inspection MAC filter entry.
This command clears all of entries in the filter
table.
This command removes an entry from the ARP
inspection MAC filter table.
Enter how long (1-10080 minutes) the MAC address filter remains
in the Switch after the Switch identifies an unauthorized ARP
packet. The Switch automatically deletes the MAC address filter
afterwards.
Apply Click Apply to add/modify the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Filter Table
This field displays a sequential number for each MAC address
No.
filter.
This field displays the source MAC address in the MAC address
MAC Address
filter.
VLAN This field displays the source VLAN ID in the MAC address filter.
Port This field displays the source port of the discarded ARP packet.
This field displays how long (in minutes) the MAC address filter
Expiry (min)
remains in the Switch.
Action Click Delete to remove the record manually.
This field displays the current number of MAC address filters that
Total were created because the Switch identified unauthorized ARP
packets.
TI-PG1284i
143