Tacacs - TRENDnet TI-PG1284i User Manual

TRENDnet User's Guide
configure port-security
(disable|enable)
interface port-security
(disable|enable)
interface port-security limit
VALUE
configure interface range
gigabitethernet1/0/
PORTLISTS
if-range port-security
(disable|enable)
if-range port-security limit
VALUE
Web Configuration
Security > IP Source Guard > Port Security
Parameter Description
Port Security Settings
Port Security Select Enable/Disable to permit Port Security on the Switch.
© Copyright 2016 TRENDnet. All Rights Reserved.
This command enables / disables the global
port security function.
This command enables / disables the port
security function on the specific port.
This command configures the maximum MAC
entries on the specific port.
This command enters the interface configure
node.
This command enables / disables the port
security function for the specified ports
This command configures the maximum MAC
entries for the specified ports.
Port Select a port number to configure.
State Select Enable/Disable to permit Port Security on the port.
The maximum number of MAC addresses allowed per interface.
Maximum MAC
The acceptable range is 1 to 30.
Port Security Status
Port This field displays a port number.
State This field displays if Port Security is Enabled or Disabled
Maximum MAC This field displays the maximum number of MAC addresses

TACACS+

The purpose of this enhancement is to support TACACS+ on the Switch platforms.
Terminal Access Controller Access Control System Plus is a security application that
provides centralized validation of users attempting to gain access to a router, network
access server etc. In order for the TACACS+ feature work it would need a TACACS+ server,
which would typically be a daemon running on a centralized UNIX or windows NT
authentication, authorization and accounting facilities for managing network access
points from a single management service.
Product Features
The TACACS+ implementation will support the following features:

The implementation will conform to version 1.78 of the TACACS+ draft RFC.

Authentication, Authorization and Accounting can be run as well as disabled
independently of each other.

In case TACACS+ authentication fails on account of the server being
unreachable the box can be made to default to a local authentication policy.

TACACS+ packet body encryption will be supported.

Single Tacacs+ server will be support.
TI-PG1284i
154