Table of Contents
Advertisement
TRENDnet User's Guide
Port Settings
Advanced Settings > IGMP Snooping > IGMP Snooping > Port Settings
Parameter
Description
Select the desired setting, Auto, Fixed, or Edge. Auto means
the Switch uses the port as an IGMP query port if the port
receives IGMP query packets. Fixed means the Switch always
treats the port(s) as IGMP query port(s). This is for when
Querier Mode
connecting an IGMP multicast server to the port(s). Edge means
the Switch does not use the port as an IGMP query port. In this
case, the Switch does not keep a record of an IGMP router
being connected to this port and the Switch does not forward
IGMP join or leave packets to this port.
Immediate
Select individual ports on which to enable immediate leave.
Leave
Configures the maximum group for the port or a range of ports.
Group Limit
Apply
Click Apply to apply the settings.
Refresh
Click this to reset the fields.
© Copyright 2016 TRENDnet. All Rights Reserved.
Port
The port ID.
Querier Mode
The Querier mode setting for the specific port.
Immediate Leave
The Immediate Leave setting for the specific port.
Group Counts
The current joining group count and the maximum group count.
Querier Settings
CLI Configuration
Node
Command
configure
igmp-snooping
This command disables / enables the IGMP
querier (disable |
snooping querier on the Switch.
enable)
configure
igmp-snooping
This command enables the IGMP snooping querier
querier vlan
function on a VLAN or range of VLANs.
VLANIDs
configure
no igmp-
This command disables the IGMP snooping querier
snooping querier
function on a VLAN or range of VLANs.
vlan VLANIDs
TI-PG1284i
Description
45
Hide quick links:
Advertisement
Table of Contents
