TRENDnet TI-PG1284i User Manual page 5

TRENDnet User's Guide
Full PoE+ Power Budget
Supplies up to 30 Watts of PoE/PoE+ power per port with a 240 Watt PoE power budget
Network Ports and Capacity
8 x Gigabit PoE+ ports and 4 x Gigabit SFP slots allow for a 24Gbps switching capacity
and 1 x console (RJ-45 to RS-232) for out-of-band management
Integrated DIN-Rail Mount
IP30 rated metal enclosure with integrated DIN-Rail mounting hardware
Full PoE Control Per Port
PoE control features include enabling/disabling PoE and class, power priority, PD alive
check, scheduling, and power delay per port using CLI or web management.
Traffic Management
Managed features include 802.1Q/Q-in-Q/GVRP/MAC & Protocol-Based VLAN, IGMP
v1/2/3, IGMP Snooping, MLD, MVR, per port bandwidth control/802.1p/DSCP/Queue
Scheduling (SPQ/WRR), STP/RSTP/MSTP spanning tree, static and dynamic link
aggregation, and Xpress Ring + ERPS protection for flexible network integration.
Layer 2+ Management
Offers IPv4/IPv6 static or DHCPv4/v6 assignment, IPv4/IPv6 static routing and proxy
ARP, DHCP server/relay/option 82, and DHCP server snooping/screening to filter out
unauthorized DHCP servers
Access Controls
Management via HTTPS and SSH protocols and features such as trusted host, ACLs, IP-
MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, IP Source
Guard provide layered network access controls.
System Monitoring
Monitoring features include SNMP v1/v2c/3, MIB support, SNMP trap, RMON Groups (1,
2, 3, 9), SMTP alert, syslog, port mirroring, SFP DDMI, and ModBus/TCP.
© Copyright 2016 TRENDnet. All Rights Reserved.
Redundant Power
Dual redundant power inputs (primary and RPS) with overload current protection
Alarm Output
Alarm relay output triggered by power failure of primary and/or redundant power and
failure per port (DIP switch)
Jumbo Frame
Sends larger packets, or Jumbo Frames (up to 10K)
Wide Temperature
Hardened switch is rated for an operating temperature range of - 40 to 75 °C (-40 to 167
°F)
Electro Magnetic Compliance
Complies with IEC61000-6-2 EMC generic standard immunity for industrial
environments
Shock and Vibration Resistant
Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-
6)
LED Indicators
LED indicators convey power, redundant power, alarm, SFP, PoE, and network port
status
Grounding Point
Grounding point protects equipment from external electrical surges
TI-PG1284i
2