TRENDnet User's Guide
Deleting IPv4/IPv6 address: This command is used to delete an IPv4/IPv6 interface
route from a interface vlan.
TI-PG1284I(config-if-vlan-l3)#no ipv4 address 192.168.20.1/24
TI-PG1284I(config-if-vlan-l3)#no ipv6 address 1234:ab::ccdd/120
Adding static IPv4/IPv6 route: This command is used to add an IPv4/IPv6 static route
to a interface vlan.
TI-PG1284I(config-if-vlan-l3)#ipv4 address 192.168.20.1/24 192.168.20.1
TI-PG1284I(config-if-vlan-l3)#ipv6 address 1234:ab::ccdd/120 1234:ab::ccdd
Deleting static IPv4/IPv6 route: This command is used to delete an IPv4/IPv6 static
route form an interface vlan.
TI-PG1284I(config-if-vlan-l3)#no ipv4 address 192.168.20.1/24 192.168.20.1
TI-PG1284I(config-if-vlan-l3)#no ipv6 address 1234:ab::ccdd/120 1234:ab::ccdd
© Copyright 2016 TRENDnet. All Rights Reserved.
Web Configuration
Advanced Settings > Static Route
Parameter
Description
Global Settings
IP Forwarding
Enables / disables the IP forwarding globally.
IP ARP Proxy
Enables / disables the route to act as an ARP proxy globally.
TI-PG1284i
117