Igmp Filtering - TRENDnet TI-PG1284i User Manual

TRENDnet User's Guide
Web Configuration
Advanced Settings > IGMP Snooping > IGMP Snooping > Querier Settings
Parameter Description
Querier State This field configures the global Querier state.
Querier VLAN
This field enables the Querier state in a vlan or a range of vlan.
State
Apply Click Apply to apply the settings.
Refresh Click this to reset the fields to the last setting.
This filed indicates the current global Querier status.
Querier State
Querier VLAN
This field indicates the Querier status in vlan.
State
© Copyright 2016 TRENDnet. All Rights Reserved.

IGMP Filtering

The IGMP Snooping Filter allows users to configure one or some of range or multicast
address to drop or to forward them.
CLI Configuration
Node Command
enable show igmp-snooping
filtering
configure igmp-snooping filtering
(enable|disable)
configure igmp-snooping filtering
profile
configure no igmp-snooping
filtering all
configure no igmp-snooping
filtering STRINGS
config-igmp Group GROUP_ID start-
address START-ADDR
end-address END-ADDR
config-igmp type (deny|permit)
config-igmp no group GROUP-ID
config-igmp no group all
config-igmp type (deny|permit)
TI-PG1284i
Description
This command displays the IGMP
snooping filtering configurations.
This command enables/disables the IGMP
snooping filtering profiles on the Switch.
This command enters the IGMP snooping
filtering profiles configuration node.
This command removes all of the IGMP
snooping filtering profiles from the
Switch.
This command removes the IGMP
snooping filtering profiles by name from
the Switch.
This command configures the group
configurations, including group index and
start multicast address and end multicast
address.
This command configures the type of
deny or permit for the group.
This command removes the group
configurations.
This command removes all of the group
configurations.
This command configures the type of
deny or permit for the group.
46