TRENDnet TI-PG1284i User Manual page 155

TRENDnet User's Guide
Refresh Click Refresh to begin configuring this screen afresh.
Port Settings
Security > 802.1x > Port Settings
Parameter Description
Port Select a port number to configure.
Select Enable to permit 802.1x authentication on the port.
802.1x State
You must first enable 802.1x authentication on the Switch
before configuring it on each port.
Select Both to drop incoming and outgoing packets on the port
Admin Control when a user has not passed 802.1x port authentication.
Direction Select In to drop only incoming packets on the port when a user
has not passed 802.1x port authentication.
Specify if a subscriber has to periodically re-enter his or her
Re-authentication
username and password to stay connected to the port.
© Copyright 2016 TRENDnet. All Rights Reserved.
Select Auto to require authentication on the port.
Select Force Authorized to always force this port to be
Port Control Mode authorized.
Select Force Unauthorized to always force this port to be
unauthorized. No packets can pass through this port.
Select Disable to disable Guest VLAN on the port.
Guest VLAN
Select Enable to enable Guest VLAN on the port.
Specify the amount of times the Switch will try to connect to the
Max-req Time authentication server before determining the server is down.
The acceptable range for this field is 1 to 10 times.
Specify how often a client has to re-enter his or her username
Reauth period and password to stay connected to the port. The acceptable
range for this field is 0 to 65535 seconds.
Specify a period of the time the client has to wait before the next
re-authentication attempt. This will prevent the Switch from
Quiet period becoming overloaded with continuous re-authentication
attempts from the client. The acceptable range for this field is 0
to 65535 seconds.
Specify how long the Switch will wait before communicating
Supp timeout with the server. The acceptable range for this field is 0 to 65535
seconds.
Specify how long the Switch to time out the Authentication
Server timeout
Server. The acceptable range for this field is 0 to 65535 seconds.
Select this and click Apply to reset the custom 802.1x port
Reset to Default
authentication settings back to default.
Apply Click Apply to add/modify the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Port Status
Port This field displays the port number.
TI-PG1284i
152