TRENDnet TI-PG1284i User Manual page 40

TRENDnet User's Guide
Select a priority for packets received by the port. Only packets
802.1p Priority without 802.1p priority tagged will be applied the priority you set
here.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
IP DiffServ (DSCP)
Advanced Settings > Bandwidth Control > IP DiffServ (DSCP)
© Copyright 2016 TRENDnet. All Rights Reserved.
Parameter Description
"Tag Over DSCP" or "DSCP Over Tag". "Tag Over DSCP" means the 802.1p
Mode
tag has higher priority than DSCP.
This field displays each priority level. The values range from 0 (lowest
Priority
priority) to 7 (highest priority).
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Priority/Queue Mapping
Advanced Settings > Bandwidth Control > Priority/Queue Mapping
Parameter Description
Click this button to reset the priority to queue mappings to the
Reset to Default
defaults.
TI-PG1284i
37