TRENDnet TI-PG1284i User Manual page 67

TRENDnet User's Guide
Selecting a port which is a member of the selected VLAN ID will
Tag Port make it a tag port. This means the port will tag all outgoing frames
transmitted with the VLAN ID.
Select All Click Select All to mark all member ports as tag ports.
Deselect All Click Deselect All to mark all member ports as untag ports.
Apply Click Apply to save your changes back to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
Tag Status
VLAN ID This field displays the VLAN ID.
Tag Ports This field displays the ports that have been assigned as tag ports.
This field displays the ports that have been assigned as untag
Untag Ports
ports.
Port Settings
Advanced Settings > VLAN > VLAN > Port Settings
© Copyright 2016 TRENDnet. All Rights Reserved.
Parameter Description
Select a port number to configure from the drop-down box.
Port
Select All to configure all ports at the same time.
PVID Select a PVID (Port VLAN ID number) from the drop-down box.
Specify the type of frames allowed on a port. Choices are All,
VLAN Untagged Only or VLAN Tagged Only.
- Select All from the drop-down list box to accept all untagged or
tagged frames on this port. This is the default setting.
Acceptable
Frame
- Select VLAN Tagged Only to accept only tagged frames on this
port. All untagged frames will be dropped.
- Select VLAN Untagged Only to accept only untagged frames on
this port. All tagged frames will be dropped.
Apply Click Apply to save your changes back to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
Port Status
Port This field displays the port number.
PVID This field displays the Port VLAN ID number.
Acceptable This field displays the type of frames allowed on the port. This will
Frame either display All or VLAN Tagged Only or VLAN Untagged Only.
TI-PG1284i
64