Table of Contents
Advertisement
TRENDnet User's Guide
no snmp user USERNAME
configure
GROUPNAME
configure
no snmp group GROUPNAME
no snmp view VIEWNAME
configure
STRINGS
Web Configuration
SNMPv3 User
Management > SNMP > SNMPv3 > SNMPv3 User
Parameter
Description
User Name
Enter the v3 user name.
Group Name
Map the v3 user name into a group name.
Select the security level of the v3 user to use.
noauth means no authentication and no encryption.
Security Level
auth means messages are authenticated but not encrypted.
priv means messages are authenticated and encrypted.
© Copyright 2016 TRENDnet. All Rights Reserved.
This command removes a v3 user from
switch.
This command removes a v3 group
from switch.
This command removes a v3 view from
switch.
Auth Algorithm
Select MD5 or SHA Algorithm when security level is auth or priv.
Set the password for this user when security level is auth or priv.
Auth Password
(pass phrases must be at least 8 characters long!)
Priv Algorithm
Select DES encryption when security level is priv.
Set the password for this user when security level is priv. (pass
Priv Password
phrases must be at least 8 characters long!)
Apply
Click Apply to configure the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
SNMPv3 User Status
User Name
This field displays the v3 user name.
Group Name
This field displays the group name which the v3 user mapping.
Auth Protocol
These fields display the security level to this v3 user.
Priv Protocol
Rowstatus
This field displays the v3 user rowstatus.
Action
Click Delete to remove a v3 user.
TI-PG1284i
167
Hide quick links:
Advertisement
Table of Contents
