Lock Or Unlock A Program In The Codec - Tieline Merlin PLUS User Manual

88 Merlin PLUS User Manual v2.0
configure FEC on each of these data streams. For more info on FEC see
Correction.
Auto Reconnect
Auto Reconnect is the simplest form of connection backup whereby the codec will redial a lost
connection continuously until it is either:
·
Re-established, or
·
Dialing is manually stopped.
Auto reconnect can be enabled when configuring a codec program designed to dial another codec or
codecs. See the procedures for configuring different programs
configuration details.
21.19

Lock or Unlock a Program in the Codec

It is possible to lock a loaded custom program in a codec to ensure the currently loaded program
type, e.g. mono, cannot be unloaded by a codec dialing in with a different program type, e.g. stereo.
For example, if your routing requirements require the codec at the studio to always connect using
mono peer-to-peer plus IFB, simply load and lock this program in the codec. Another reason for
locking a program in the answering codec is to always use a particular jitter buffer or FEC setting.
Generally programs will be up or down-mixed by the answering codec to match the loaded program
type. In some situations incompatible program types will be rejected. A compatible program type can
still connect and specify different connection parameters such as algorithm preferences and bit rates
via session data.
1. Press the HOME
2. Select Settings and press
3. Navigate to System and press
4. Navigate to Lock Program and press
5. When program lock is Enabled a warning message confirms program status.
6. When program lock is Disabled a warning message confirms incoming calls may load any
supported factory program.
button to return to the Home screen.
.
.
to toggle between Enabled and Disabled.
Configuring Forward Error
using the web-GUI for more
© Tieline Pty. Ltd. 2017