Tieline Merlin PLUS User Manual page 201

Important Notes: Automatic or fixed jitter buffer settings can be adjusted on individual
client codecs as required. There is no jitter buffer setting on the server codec because it
never receives audio packets.
9. Click the Enable Auto Reconnect check-box to turn this feature on, then click Next.
10. After configuring these settings there are 2 options:
i. Click Next to configure Output Audio Source options.
ii. Click Save Program to save the program.
Configuring Output Audio Source Options
1. Click Next to configure Output Audio Source options and automatically switch between up
to 4 backup audio sources to maintain program
audio. Output Audio Source options include:
·
Connection: Decoded connection audio sent from a remote codec (Note: this must be
selected as one of the configured sources).
·
Input: Input audio looped to the physical codec outputs.
·
HTTP: Icecast client mode to allow media server streaming from a specified URL.
·
USB File Playback: Audio file playback from a USB stick.
2. Click the blue Plus symbol
symbol
© Tieline Pty. Ltd. 2017
to add a backup Output Audio Source, or click the Minus
to remove an Output Audio Source.
Merlin PLUS User Manual v2.0 201