Tieline Merlin PLUS User Manual page 193

Line Hunt
Important Note: The G3 profile setting supports maintaining specific G3 codec settings
when answering a call from a G5 codec.
1. Enter the name of the connection in the text box, then click Next.
2. Configure the transport settings:
For IP click the drop-down Session Protocol menu and select Tieline Codecs and
ensure the Any check-box is not selected, then click Next.
Note: Deselecting the Any check-box ensures that any codec connecting using the
audio port specified will always be routed to codec output 1. By default, port 9000 is the
port specified for the first IP audio stream connection made by any Tieline codec; port
9010 is used by default for a second IP connection. Merlin PLUS default ports for mono
connections 3 to 6 are 9020, 9030, 9040 and 9050. If you need to change this setting on
your remote dialing codec, or in your Report-IT smartphone application, this will need to
be adjusted accordingly in the answering codec.
Click to configure:
© Tieline Pty. Ltd. 2017
Create line hunt groups for multiple incoming callers on a first come, first
served basis. This is ideal for separating groups of inputs and outputs
between different studios or stations. See
more information.
1. Auto: The codec will dial the G3 codec and connect in mono or stereo.
2. Dual Program: This allows the codec to dial a G3 codec with a Dual Program
profile loaded and support two simultaneous mono connections.
3. Runtime: The G3 codec will retain runtime settings when answering a call from a
G5 codec.
4. Custom: The G3 codec will load a specified profile, e.g. profile 6, which is the first
custom profile number.
Important Note: The Local Audio Port is used by the local codec to receive
audio from the remote codec. When Tieline Codecs is the Session Protocol
selected (using Tieline session data), the Local Audio Port is automatically
configured as UDP audio port 9000 by default for the first audio stream.
·
Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for
Buffer priority. It is also possible to configure the Minimum depth and Maximum
depth of jitter over the connection. See
Merlin PLUS User Manual v2.0
Line Hunt Call Answering
Configuring the Jitter Buffer
193
for
for more details.