Tieline Merlin PLUS User Manual page 170

170 Merlin PLUS User Manual v2.0
Select POTS Codec in the Mode drop-down menu to encode/decode using POTS, or
select Analog Phone to configure a standard analog phone call, then click Next.
Next, enter the phone number of the codec or device you want to dial. When multiple
POTS modules are installed, click the Via drop-down menu and select Module 1 or
Module 2 to specify which POTS module will dial. Next, click Save Program to save
the program with default settings, or click Next to specify algorithm settings and
configure a backup connection if required (recommended).
Dialing configuration settings for this POTS audio stream are now complete.
5. Continue through the steps in the wizard to complete configuration in the same way as the
first connection was configured. Then click Save Program to complete configuration, then
click Finish to exit the wizard.
6. The newly created program will be displayed in the left pane within the Program Manager
panel and in the Program Loader panel.
using the Connections panel, or
Select and connect audio streams
dial a program manually
in a program
using the codec front panel.
© Tieline Pty. Ltd. 2017