Monitoring Isdn Connections; Steps To Connect Over Pots - Tieline Merlin PLUS User Manual

Monitoring ISDN Connections

21.4
Each new audio stream connection becomes visible in the Cxns menu via the Home screen.
1. Press the HOME
2. Use the navigation buttons to select Cxns and press the
3. If a single ISDN audio stream is connected, the Connected ISDN screen will display
details of the active ISDN connection. When multiple audio streams are connected, navigate
to the one you want to view in the Connections screen, e.g. ISDN, and press the
to view more details.
21.5

Steps to Connect over POTS

The following procedure explains how to create a custom peer-to-peer program and dial another
Tieline codec over POTS using the front panel keypad and navigation buttons.
Important Notes:
·
See
and maintaining reliable POTS connections.
·
See
·
See
answering calls from non-Tieline POTS codecs)
·
See
·
The Local and Remote line quality displayed for POTS Codec connections is related to
the actual POTS line quality at either end of the link. This reading affects the maximum
allowable bit rate when the codec is training and negotiating a connection.
1. Press
adjustment screen.
·
Press the number on the keypad corresponding to the channel you want to toggle on or off.
E.g. press
·
Use the up
button to toggle ganging on/off.
·
Use the up
Note: A channel is highlighted when selected.
·
Use the left
2. Press the HOME
the button.
3. Use the RETURN
KEYPAD to enter the number you want to dial. Note: When POTS (Ready) is displayed
© Tieline Pty. Ltd. 2017
button to return to the Home screen.
POTS Connection Tips and Precautions
POTS Module Settings
POTS Answering Configuration
Configuring POTS for details on configuring codec connections via a computer.
and press and release the right
on the numeric keypad to toggle channel 1 on and off.
and down navigation buttons to select the gang function and press the
and down navigation buttons to select a single channel, or ganged channels.
and right navigation buttons to adjust the input levels up or down.
button to return to the Home screen, select Connect > POTS and press
button to delete any numbers if already entered, then use the numeric
Merlin PLUS User Manual v2.0
for valuable information about setting up
for details on module settings.
for details on POTS answering settings (required for
arrow button to open the Input Audio Level
button.
71
button