Tieline Merlin PLUS User Manual page 144

144 Merlin PLUS User Manual v2.0
·
Select Mono/Stereo Peer-to-Peer, or if you want to use an existing program as a template,
select this option. Then click Next.
Important Note: When you decide to use an existing program as a template, the new
program inherits all the settings of the template program and you can adjust these
settings as required by continuing through the program wizard.
3. Enter a name for the Audio Stream, add a caller ID and configure the codec to dial, answer or
dial and answer. Then click Next. Note: The caller ID is used to identify calls.
Routing Type Options:
Default
Deterministic
Line Hunt
No Dial Route or Answer Route is configured. An incoming call will be
routed to an audio stream on a first-come, first-served basis in a multi-
stream program. Note: By default IP streams are routed using audio
ports.
Select a Dial Route or Answer Route to configure deterministic routing
of multiple audio streams using transports like ISDN or POTS. Use of
Dial and Answer Routes is not necessary over IP. See
Answering or Configuring POTS Answering
Create line hunt groups for multiple incoming callers on a first come, first
served basis. This is ideal for separating groups of inputs and outputs
between different studios or stations. See
more information.
Configuring ISDN
for more information.
Line Hunt Call Answering
© Tieline Pty. Ltd. 2017
for