Tieline Merlin PLUS User Manual page 182

182 Merlin PLUS User Manual v2.0
10. Configure the IFB transport settings:
For IP click the drop-down Session Protocol menu and select Tieline Codecs and
ensure the Any check-box is not selected, then click Next.
Click to configure:
·
·
·
ISDN settings are determined by ISDN module answering settings. For more details see
Configuring ISDN Answering.
POTS settings are determined by POTS module answering settings. For more details
see Configuring POTS
11. After configuring all settings there are 3 options:
Important Note: When Tieline Codecs is the Session Protocol selected
(using Tieline session data), the Local Audio Port is automatically configured
as UDP audio port 9010 by default for the second audio stream.
Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for
Buffer priority. It is also possible to configure the Minimum depth and Maximum
depth of jitter over the connection. See
Alternatively, select a Fixed Buffer Level and enter the Jitter Depth, which must
be between 12ms and 5000ms depending on the algorithm you select.
Local FEC settings if required.
Answering.
i. If you want to create another answering connection, select the check-box
for Create another answering connection and continue through the
wizard.
ii. Click Next to configure rules options.
iii. Click Next Stream to configure the second stereo audio stream and IFB
stream.
Configuring the Jitter Buffer for more details.
© Tieline Pty. Ltd. 2017