Tieline Merlin PLUS User Manual page 60

60 Merlin PLUS User Manual v2.0
Creating Programs
Only the simplest peer-to-peer (point-to-point) programs can be created using the codec front panel.
The HTML5 Toolbox Web-GUI contains a Program Manager panel with a wizard for configuring
program settings and backup connections. Edit settings easily at the touch of a button and use
existing programs as templates for creating other programs.
Mono and Stereo Peer-to-Peer Programs
New peer-to-peer programs can be created using the codec front panel keypad (see
Connect over
do is enter this into the codec, select your preferred connection settings and then press
CONNECT
Programs dialed from the front panel are automatically saved as Recent Programs which retain
all audio stream dialing and configuration information. These Recent Programs are displayed
when you press the CONNECT
Mode screens, or the Connect IP or Connect SIP screens.
Ensure you configure all the correct connection settings when using the codec front panel,
because these are stored as part of the program's profile when you first connect. They cannot
be adjusted afterwards without using the editing features in the Program panel within the
Toolbox Web-GUI.
Important Note: When configuring a connection use the Save function to save programs
permanently to the codec's Programs menu. Otherwise they are stored to the Recent
Programs list and will be overwritten after several calls have been made.
IP). If you know the IP address of the codec you want to dial then all you need to
.
button from within any menu except the IP Mode or SIP
Steps to
© Tieline Pty. Ltd. 2017