Steps To Connect Over Isdn - Tieline Merlin PLUS User Manual

68 Merlin PLUS User Manual v2.0
FECd
21.3

Steps to Connect over ISDN

The following procedure explains how to create a custom peer-to-peer program and dial another
Tieline codec over ISDN using the front panel keypad and navigation buttons.
Important Notes:
·
See
maintaining reliable ISDN connections.
·
See
·
See
·
See
5. For detailed information about connecting with other brands of codec using ISDN click
1. Press
adjustment screen.
·
Press the number on the keypad corresponding to the channel you want to toggle on or off.
E.g. press
·
Use the up
button to toggle ganging on/off.
·
Use the up
Note: A channel is highlighted when selected.
·
Use the left
2. Press the HOME
the button.
3. Navigate to Setup and press the
4. Select whether to dial with Tieline Session Data or select Sessionless if dialing a non-Tieline
codec, then press the
Indicates the
number of FEC
repaired packets
if FEC active.
Testing ISDN Connections
ISDN Module Configuration
ISDN Answering Configuration
Configuring ISDN to configure ISDN settings using the HTML5 Toolbox Web-GUI.
http://www.tieline.com/interoperability
and press and release the right
on the numeric keypad to toggle channel 1 on and off.
and down navigation buttons to select the gang function and press the
and down navigation buttons to select a single channel, or ganged channels.
and right navigation buttons to adjust the input levels up or down.
button to return to the Home screen, select Connect > ISDN and press
button.
·
Packets have been
lost or corrupted over
the network
for valuable information about setting up and
for details on module settings.
for details on ISDN answering settings.
arrow button to open the Input Audio Level
button.
·
Assess audio quality & the number
of FEC repairs – if many packets are
being 'lost' perhaps reduce FEC
&/or renegotiate bit rate down.
© Tieline Pty. Ltd. 2017