Adjusting Time Settings; Test Mode - Tieline Merlin PLUS User Manual

Important Note: The default Auto Dim time-out is reduced from 30 seconds to 10
seconds when the Auto Lock function is enabled (to lock the front panel controls).
Disabling Auto Dim mode will override all time-out periods and the LCD will remain fully
illuminated at all times.
24.18

Adjusting Time Settings

By default Use NTP time is enabled in the codec. When the codec is attached to a network it will
automatically ping the selected NTP server every two hours and update the time in the codec. It is
also possible to manually synchronize the time. Note: The codec will not ping a server while
connected.
To adjust time settings in the codec:
1. Press the SETTINGS
2. Use the navigation buttons to select Time and press the
3. Navigate to Use NTP and press the
4. Navigate to NTP Synchronize Now and press the
with the designated NTP Server.
24.19

Test Mode

Test mode is used by the codec to perform an input/output loopback test of audio. E.g. Input 1 is
routed to Output 1, Input 2 is routed to Output 2 etc.
1. Press the SETTINGS
2. Navigate to Audio and press
3. Navigate to Test Mode and press
Navigate to
4.
Loopback input/output test mode is enabled while the Audio Loopback Test Mode dialog appears
on the screen. When you navigate out of this screen this test mode ceases.
© Tieline Pty. Ltd. 2017
button.
button.
.
and press to view the
Info
Merlin PLUS User Manual v2.0
button.
button to enable or disable this feature.
button to synchronize the codec time
Audio Loopback Test Mode
291
summary.