Tieline Merlin PLUS User Manual page 72

72 Merlin PLUS User Manual v2.0
throughout POTS menus it means the POTS module has initialized and is ready to accept or
make a call.
4. Navigate to Setup and press the
5. Select Via to nominate the module used when dialing a connection, or select Any to use any
available module in the codec, then press the
6. Navigate to the connection Mode and press the
POTS Codec or Analog Phone. Note: Redundant settings in the menu will disappear If you
select Analog Phone.
7. Select an algorithm, then press the
8. Select Tieline Codecs session data when connecting to another Tieline codec or Sessionless
when dialing to non-Tieline POTS codecs.
Important Notes: To dial a Comrex® Vector, Matrix® or BlueBox® codec over POTS
select the Other algorithm and Sessionless. Please note that 9.6kbps connections are
not supported by Comrex codecs.
button.
button.
button to toggle between selecting either
button.
© Tieline Pty. Ltd. 2017