Tieline Merlin PLUS User Manual page 213

9. Click Next to select the check-box if you want to Enable Auto Reconnect.
10. Click Next to name the answering connection for when calls are received by the codec.
11. Click Next to configure the Session Protocol as SIP for the answering connection to
receive a SIP call.
12. Click Next to configure the jitter and FEC settings for the answering connection.
13. After configuring all settings there are 3 options:
i. If you want to create another answering connection, select the check-box for Create
ii. Click Save Program to save the program at this point.
iii. Click Next to configure rules options.
14. To configure new rules click the drop-down arrow and select the preferred option from those
available. Click the blue Plus symbol
to remove a rule.
© Tieline Pty. Ltd. 2017
another answering connection and continue through the wizard.
Merlin PLUS User Manual v2.0
to add a new rule and click the Minus symbol
213