Tieline Merlin PLUS User Manual page 157

POTS module answering settings are used if you select POTS as the connection
transport. For more details see
6. After configuring all settings there are 3 options:
7. To configure new rules click the drop-down arrow and select the preferred option from those
available. Click the blue Plus symbol
to remove a rule.
Important Notes for Rules:
·
Rules for connecting or disconnecting an audio stream are configured in the Program
Manager panel. Rules for connecting or disconnecting a program are configured in the
Rules panel. See
·
A non-WheatNet-IP Tieline codec can be configured to trigger a logic IO in a Tieline
WheatNet-IP codec. Up to 64 logic IOs are available in Genie Distribution and Merlin
PLUS WheatNet-IP codecs, as well as 4 physical GPIOs.
·
Connection-related rules are not displayed in Answer only programs.
8. Click Next and enter a name for the Audio Stream, add a caller ID and configure the
codec to Answer only. Then click Next.
9. Enter the name of the second audio stream connection in the text box and click Next.
© Tieline Pty. Ltd. 2017
i. If you want to create another answering connection, select the check-box for
Create another answering connection and continue through the wizard.
ii. Click Next Stream to configure the second audio stream.
iii. Click Next to configure rules options.
Creating Rules
Merlin PLUS User Manual v2.0
Configuring POTS Answering.
to add a new rule and click the Minus symbol
for more information.
157