Deleting Programs; Selecting Algorithm Profiles - Tieline Merlin PLUS User Manual

Connecting a Multicast Client Program
1. After you have created multicast server and client programs on your codecs you can dial
multicast connections. First select the multicast server program you want to use on the server
codec and dial to connect.
2. Select and load the multicast client program on each of the multicast client codecs and dial the
multicast IP address to begin receiving multicast audio packets.
a. Press the HOME
b. Use the navigation buttons to select Programs and press the
c. Use the up
want to connect with, then press the
d. Press the CONNECT
You can navigate to Cxns on the Home screen to view a codec's connection Status, then press
to view connection statistics for IP packets being received over the connection.
21.15

Deleting Programs

1. Press the HOME
2. Use the navigation buttons to select Programs and press the
3. Navigate to the program you want to delete and press the
4. Navigate to Delete and press the
5. Confirm the deletion and press the
21.16

Selecting Algorithm Profiles

A number of pre-programmed mono and stereo dialing profiles are available for programming the
codec quickly without individually selecting algorithms and bit rates etc. These profiles have been
programmed with the most popular settings that provide high quality connections using each
available algorithm.
1. Press the HOME
2. Use the navigation buttons to select Connect and press the
3. Select IP and press the
4. Select Tieline session mode and press the
available for Tieline session connections.
© Tieline Pty. Ltd. 2017
button to return to the Home screen.
and down navigation buttons to select the multicast client program you
button to make a connection.
button to return to the Home screen.
button.
button to return to the Home screen.
button.
Merlin PLUS User Manual v2.0
button to load the program.
button.
button. Note: algorithm profiles are only
button.
button.
button.
button.
83