Tieline Merlin PLUS User Manual page 215

Important Note: When you decide to use an existing program as a template, the new
program inherits all the settings of the template program and you can adjust these
settings as required by continuing through the program wizard.
3. Enter a name for the Audio Stream and configure the codec to dial, answer or dial and
answer. Then click Next.
Note: The following example will display how to configure a dial and answer program. If you want the
codec to either dial or answer only, select the option and the wizard will automatically display
screens to allow you to configure the codec correctly. When answering multiple SIP connections,
answer routes can be used to create deterministic dialing, which routes audio from incoming calls
consistently to the same inputs and outputs. For more information please see
SIP Peer-to-Peer
be used for SIP connections because Tieline session data is replaced by SDP for SIP connections.
4. This audio stream connection in the wizard will allow the codec to dial. Enter the name of
the connection in the text box, then click Next.
© Tieline Pty. Ltd. 2017
Programs. Please note that caller ID, dial routes and G3 profile information can not
Merlin PLUS User Manual v2.0 215
Answering Multiple