Aaa Accounting Default - Cisco Nexus 5500 Series Command Reference Manual

aaa accounting default

aaa accounting default
To configure authentication, authorization, and accounting (AAA) methods for accounting, use the aaa
accounting default command. To revert to the default, use the no form of this command.
Syntax Description
group
group-list
local
Command Default The local database is the default.
Command Modes
Global configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines The group group-list method refers to a set of previously defined RADIUS or TACACS+ servers. Use
the radius-server host command to configure the host servers. Use the aaa group server command to
create a named group of servers.
If you specify the group method, or local method and they fail, then the accounting authentication can
fail.
Examples This example shows how to configure any RADIUS server for AAA accounting:
switch(config)# aaa accounting default group
Related Commands Command
aaa group server
radius
radius-server host
show aaa accounting
tacacs-server host
Cisco Nexus 5500 Series NX-OS Security Command Reference
2
aaa accounting default {group {group-list} | local}
no aaa accounting default {group {group-list} | local}
Specifies that a server group be used for accounting.
Space-delimited list that specifies one or more configured RADIUS server
groups.
Specifies that the local database be used for accounting.
Modification
This command was introduced.
Description
Configures AAA RADIUS server groups.
Configures RADIUS servers.
Displays AAA accounting status information.
Configures TACACS+ servers.
Chapter A Commands
OL-27883-02