Device Reboot - HP 1920 Gigabit Ethernet Switch Series User Manual

Item
If a file with the same
name already exists,
overwrite it without any
prompt
Reboot after the upgrade
finished

Device reboot

CAUTION:
• Before rebooting the device, save the configuration. Otherwise, all unsaved configuration will be lost
after device reboot.
When the device reboots, re-log in to the device.
•
1. Select Device > Device Maintenance from the navigation tree.
2. Click the Reboot tab.
Figure 41 Device reboot page
3. Enable or disable the "Check whether the current configuration is saved in the next startup
configuration file" option.
4. Click Reboot. A confirmation dialog box appears.
5. Click OK.
If you select Check whether the current configuration is saved in the next startup configuration
file, the system will check the configuration before rebooting the device. If the check succeeds,
the system reboots the device. If the check fails, a dialog box appears, telling you that the
current configuration and the saved configuration are inconsistent, and the device is not
rebooted. In this case, save the current configuration manually before you can reboot the
device.
If you do not select the box, the system reboots the device directly.
Description
Specify whether to overwrite the file with the same name.
If you do not select the option, when a file with the same name exists, a dialog box
appears, telling you that the file already exists and you cannot continue the
upgrade.
Specify whether to reboot the device to make the upgraded software take effect
after the application file is uploaded.
53