This feature enables/disables the ability to link a wireless handheld to a
base station without scanning the Unlink label first.
DEFAULT
Direct Radio Link = Automatic Unlinking
These features allow configuration of source radio data inclusion.
Source Radio Address Transmission
Enables/disables the ability of source radio address information to be
transmitted to the host and, if so, at what position with respect to the label
data. See
for setting this feature.
DEFAULT
Source Radio Address Transmission = Prefix
Product Reference Guide
DIRECT RADIO AUTOLINK
RF ADDRESS STAMPING
page 304
in "References" for detailed information and examples
When included as a prefix, the source-radio ID is displayed after all
label formatting has been applied. The 6 byte hex address is sent as
12 ascii characters, i.e., an address of 00 06 66 00 1A ED will be sent as
(shown in hex): 30 30 30 36 36 36 30 30 31 41 45 44
Enter/Exit Programming Mode
Direct Radio Link = Unlink Label Required
Source Radio Address Transmission = Do Not Include
219