Direct Radio Autolink; Rf Address Stamping; Source Radio Address Transmission - Datalogic PowerScan 9500 Series Product Reference Manual

This feature enables/disables the ability to link a wireless handheld to a
base station without scanning the Unlink label first.
DEFAULT
$CBTDL01(CR)
Direct Radio Link = Automatic Unlinking
These features allow configuration of source radio data inclusion.

Source Radio Address Transmission

Enables/disables the ability of source radio address information to be
transmitted to the host and, if so, at what position with respect to the label
data. See
for setting this feature.
DEFAULT
$CBTAS01(CR)
Source Radio Address Transmission = Prefix
Product Reference Guide

DIRECT RADIO AUTOLINK

RF ADDRESS STAMPING

page 288 in "References" for detailed information and examples
When included as a prefix, the source-radio ID is displayed after all
label formatting has been applied. The 6 byte hex address is sent as
12 ascii characters, i.e., an address of 00 06 66 00 1A ED will be sent as
(shown in hex): 30 30 30 36 36 36 30 30 31 41 45 44
Enter/Exit Programming Mode
$CBTDL00(CR)
Direct Radio Link = Unlink Label Required
$CBTAS00(CR)
Source Radio Address Transmission = Do Not Include
217