The features in this section are valid only for Gryphon Bluetooth models.
Also reference the Setup section for instructions on
a PC,"
These features allow configuration of source radio data inclusion.
Source Radio Address Transmission
Enables/disables the ability of source radio address information to be
transmitted to the host and, if so, at what position with respect to the label
data. See
for setting this feature.
DEFAULT
$CBTAS01(CR)
Source Radio Address Transmission = Prefix
Product Reference Guide
BLUETOOTH-ONLY FEATURES
starting on page 18.
RF ADDRESS STAMPING
page 302
in "References" for detailed information and examples
When included as a prefix, the source-radio ID is displayed after all
label formatting has been applied. The 6 byte hex address is sent as
12 ascii characters, i.e., an address of 00 06 66 00 1A ED will be sent as
(shown in hex): 30 30 30 36 36 36 30 30 31 41 45 44
Enter/Exit Programming Mode
"Linking a BT Reader to
$CBTAS00(CR)
Source Radio Address Transmission = Do Not Include
249