Table of Contents
Advertisement
USING THE BC96XX BASE STATION
The BC96XX base station, when paired with one or more PowerScan™ PM96XX readers,
builds a Cordless Reading System for the collection, decoding and transmission of bar
code data. It can be connected to a Host PC via RS232, USB, USB Type C, or Ethernet,
depending on the interchangeable connection module.
With the adoption of the Wireless Power Transfer technology, the base station can
charge the battery of the gun without contacts, with a performance depending on the
power supply type used.
The label on the base station has LED indicators and a touch button. Touch the button
for 2 seconds and all properly configured and switched on scanners (with battery profile
different from Max Autonomy) that are linked to that base station and within the radio
range coverage, will emit a beep and blink within 5 seconds. This feature is useful to:
•
•
The LEDs signal the BC96XX status, as explained below.
Green LED
Lateral Light
Ethernet
(
Ethernet models only
verify which scanners are linked to a particular base station;
detect a scanner forgotten somewhere.
LED
Solid green: the base station is powered.
Blinking: the base station is receiving data
Indicates the state of the battery charge.
Orange slow blinking: battery level is under
50%,
the reader is charging.
Green slow blinking: battery level is over 50%,
Bands
the
reader is charging.
Solid Green: the battery of the reader is fully
charged
• BF LE D (red/green): network status;
• LINK LED (yellow/green): link activity;
• SF LED (red/green): module status;
• PWR LED (green): power ON (located on
the connection module this LED is not visi-
ble when installed in the cradle).
)
USING THE BC96XX BASE STATION
STATUS
PRODUCT REFERENCE GUIDE
13
Advertisement
Table of Contents
