Profinet Io Fieldbus Couplers 750-375(/025-000), 750-377(/025-000); 2Ai Rtd Parameterization; Figure 18: Example Of The Profibus Dp Fieldbus Couplers/Controllers Parameterization Dialog; Table 37: Configuration Profinet Io - WAGO -I/O-SYSTEM 750 Manual

52 Appendix
8.1.1.2 PROFINET IO Fieldbus Couplers
750-375(/025-000), 750-377(/025-000)
When using the aforementioned PROFINET IO fieldbus couplers, the process
image size is configured by selecting the corresponding GSD entry.

Table 37: Configuration PROFINET IO

GSD Entry
Module
75x-461(/0..-000)
2AI, RTD
8.1.2

2AI RTD Parameterization

The I/O module can be supplied with all operating parameters when selecting the
module entry in the GSD file on the PROFIBUS DP
fieldbus devices.

Figure 18: Example of the PROFIBUS DP fieldbus Couplers/Controllers parameterization dialog

*
)
Only available for GSD entry „75x-461 2AI/RTD, PRM"
and „75x-461 2AI/RTD RA, PRM"
Sub-Module
INT16[2] I
{UINT8, INT16}[2] I/O
WAGO-I/O-SYSTEM 750
750-461 2AI Pt100/RTD
PI-Length/[Byte] Data Type
I O
4 n/a
6 6 {UINT8, INT16}
*
) and PROFINET IO
Inst.
INT16
2
Manual
Version 1.4.0