Examples - Siemens sinumerik 840D sl Function Manual

Examples

Example program for 3D circumferential milling:
$TC_DP1[1,1]=120
$TC_DP3[1,1] =
$TC_DP6[1.1] =8
N10 X0 Y0 Z0 T1 D1 F12000
N20 TRAORI(1)
N30 G42 ORIC ISD=10 CUT3DC G64 X30
N40 ORIWKS A30 B15
N50 Y20 A3=1 C3=1
N60 X50 Y30
N70 Y50 A3=0.5 B3=1 C3=5
N80 M63
N90 X0 ISD=20
N100 G40 Y0
N110 M30
Special functions: 3D Tool Radius Compensation (W5)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
; Definition of tool D1
; Type (end mill)
; Length offset vector
; Radius
; Selection of the tool
; Activate transformation
; Activate 3D circumferential milling, changes of orientation
; constant at outside corners, 10mm insertion depth.
; Change of orientation at a corner
; through specification of axis positions.
; Traversing block with change in orientation, specification
; orientation with direction vectors
; Traversing block with constant orientation
; Traversing block with change in orientation
; Block without traversing information
; Traversing block with change in insertion depth
;Deactivating the tool radius compensation
4
33