Siemens sinumerik 840D sl Function Manual page 253

Curve tables in the number range n to m.
CTABUNLOCK(n, m)
All curve tables, irrespective of memory type
CTABUNLOCK()
All curve tables in the specified memory type
CTABUNLOCK(, , memType)
Other commands for calculating and differentiating between curve tables for applications for
diagnosing and optimizing the use of resources:
• Number of defined tables irrespective of memory type
• Number of defined tables in SRAM or DRAM of NC memory
• Number of possible curve tables in memory memType.
• Table number of nth curve table.
• Indicates the block state of curve table number n.
• Checks curve table number n.
Special functions: Axis Couplings and ESR (M3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
CTABNO()
CTABNOMEM(memType)
CTABFNO(memType)
General form: CTABID(n, memType)
Generates the table number of the nth curve table with memory type memType.
CTABID(1, memType) is used to read out the highest curve number (105) of the memory
type specified.
CTABID(n)
Generates the table number of the nth curve table in the memory specified using the
following machine data:
MD20905 $MC_CTAB_DEFAULT_MEMORY_TYPE (default memory type for curve
tables)
CTABID(p)
Generates the ID (table number) of the curve table entered in the memory as the pth
curve table.
Note
If for example, the sequence is changed between consecutive calls of CTABID(), then
CTABID(n, ...) can be used to provide a different curve table than the one provided before
the cahnge.
CTABISLOCK(n)
CTABEXISTS(n)
Detailed description
2.2 Curve tables
33