Siemens sinumerik 840D sl Function Manual page 702

Hide thumbs Also See for sinumerik 840D sl:
Table of Contents

Advertisement

Boundary conditions
3.1
Function-specific alarm texts
The procedure to be following while creating function-specific alarm texts is described in:
References:
/FB3/ Function Manual, Special Functions; Installation and Activation of Readable Compile
Cycles (TE01), Section: Creating alarm texts
3.2
Functional restrictions
NCU 572.2
The handling transformation package can be utilized on NCU 572.2 hardware only on
condition that is has been specifically enabled for the customer.
Clearance control
The handling transformation package cannot be operated together with the technology
function: "clearance control", as generally the three basic axes are not arranged
perpendicular to one another.
Moving to fixed end stop
The handling transformation package cannot be operated in conjunction with the "travel to
fixed stop" function.
Several transformations
The handling transformation package can only be activated once per channel.
Tool programming
Tools can only be parameterized by specifying tool lengths. It is not possible to program an
orientation for the tool.
Special functions: Handling Transformation Package (TE4)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
3
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents