Signals From Axis/Spindle (Db31 - Siemens sinumerik 840D sl Function Manual

Detailed description
2.14 MCS Coupling (TE6)
2.14.2

Signals from axis/spindle (DB31, ...)

DB31, ...
DBX66.0
Edge evaluation: No
Signal state 1
Signal state 0
DB31, ...
DBX97.0
Edge evaluation: No
Signal state 1
Signal state 0
DB31, ...
DBX97.1
Edge evaluation: No
Signal state 1
Signal state 0
Signal irrelevant for ...
Application example(s)
DB31, ...
DBX97.2
Edge evaluation: No
Signal state 1
Signal state 0
Signal irrelevant for ...
Application example(s)
DB31, ...
DBX97.3
Edge evaluation: Yes
24
Activate monitor
Signal(s) updated:
Monitoring is active.
This readout must be activated by the PSlave axis in the the following machine data:
MD63543 $MD_CC_PROTECT_OPTIONS
Note:
Conflicts may occur in connection with customer-specific compile cycles.
Monitor is not active.
Axis is a slave axis
Signal(s) updated:
Axis is a CC_Slave axis.
The associated CC_Master axis can be found in the machine data.
Axis is not a CC_Slave axis
Activate coupling
Signal(s) updated:
Coupling active
Coupling not active
Displayed only for the CC_Slave axis.
Activate mirroring
Signal(s) updated:
Mirroring active (1:-1)
1:1 coupling active
Relevant only if coupling is active (DBX97.1 = 1)
Displayed only for the CC_Slave axis.
Offset after point of activation
Signal(s) updated:
Special functions: NC/PLC interface signals (Z3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0