Siemens sinumerik 840D sl Function Manual page 339

CPSETTYPE=
Following axis type
2.5.6.3 Projected coupling (CPRES)
If the coupling type "Synchronous spindle" is set, (see CPSETTYPE), the coupling properties
contained in machine data can be activated instead of the programmed coupling properties.
References:
/FB2/ Function Manual, Extension Functions; Synchronized Spindle (S3).
Chapter: Programming of synchronous spindle couplings
Programming
Syntax:
Identifiers:
Functionality:
Following
spindle:
Example:
CPLON[S2]=(S1) CPSETTYPE[S2]="COUP"
...
CPRES=(S2)
Special functions: Axis Couplings and ESR (M3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
TRAIL LEAD
CPRES=(<following spindle>)
Coupling Restore
Activates projected data of the synchronous spindle coupling to
following spindle FAx.
Type: AXIS
Range of All defined spindle identifiers in the channel
values:
Detailed description
2.5 Generic coupling
EG
; Creates a coupling module for following
spindle S2 with leading spindle S1 and
activates the coupling module. Coupling
properties are set such that they
correspond to the existing synchronous
spindle coupling type.
; Activates projected data of the
synchronous spindle coupling to following
spindle S2.
COUP
Alarm 14092
with axis
119