Siemens sinumerik 840D sl Function Manual page 254

Detailed description
2.2 Curve tables
• Returns the memory in which curve table number n is stored.
• Returns the table periodicity.
• Number of curve segments already used in memory memType.
• Number of curve segments used in curve table number n
• Number of still possible curve segments in memory memType.
• Maximum number of possible curve segments in memory memType.
CTABMSEG(memType, segType)
• Number of polynomials already used in memory memType.
CTABPOL(memType)
• Number of curve polynomials used by curve table number n.
CTABPOLID(n)
• Number of still possible polynomials in memory memType.
CTABFPOL(n)
• Maximum number of possible polynomials in memory memType.
CTABMPOL(n)
Boundary values of curve tables
Behavior of the leading axis/following axes on the edges of the curve table:
• The value at the beginning of the curve table is read by a following axis.
• The value at the end of the curve table is read by a following axis.
CTABTEV(n, degrees, FAxis), following value at the end of the curve table
• The value at the beginning of the curve table is read by the leading axis.
• The value at the end of the curve table is read by the leading axis.
• Determine the value range of the following value.
34
CTABMEMTYP(n)
CTABPERIOD(n)
CTABSEG(memType, segType)
CTABSEGID(n, segType)
CTABFSEG(memType, segType)
CTABTSV(n, degrees, F axis), following value at the beginning of the curve table
CTABTSP(n, degrees, FAxis), master value at the beginning of the curve table
CTABTEP(n, degrees, FAxis), master value at the end of the curve table
CTABTMIN(n, FAxis), minimum following value of curve table
CTABTMAX(n, FAxis), maximum following value of the curve table
Special functions: Axis Couplings and ESR (M3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0