Siemens sinumerik 840D sl Function Manual page 125

Number Identifier: $MC_
24452 TRAFO_AXES_IN_7[n]
24454 TRAFO_GEOAX_ASSIGN_TAB_7[n]
24460 TRAFO_TYPE_8
24462 TRAFO_AXES_IN_8[n]
24464 TRAFO_GEOAX_ASSIGN_TAB_8[n]
24470 TRAFO_TYPE_9
24472 TRAFO_AXES_IN_9[n]
24474 TRAFO_GEOAX_ASSIGN_TAB_9[n]
24480 TRAFO_TYPE_10
24482 TRAFO_AXES_IN_10[n]
24484 TRAFO_GEOAX_ASSIGN_TAB_10[n]
24500 TRAFO5_PART_OFFSET_1[n]
24510 TRAFO5_ROT_AX_OFFSET_1[n]
24520 TRAFO5_ROT_SIGN_IS_PLUS_1[n]
24530 TRAFO5_NON_POLE_LIMIT_1
24540 TRAFO5_POLE_LIMIT_1
24550 TRAFO5_BASE_TOOL_1[n]
24558 TRAFO5_JOINT_OFFSET_PART_1[n]
24560 TRAFO5_JOINT_OFFSET_1[n]
24561 TRAFO6_JOINT_OFFSET_2_3_1[n]
24562 TRAFO5_TOOL_ROT_AX_OFFSET_1[n]
24564 TRAFO5_NUTATOR_AX_ANGLE_1
24570 TRAFO5_AXIS1_1[n]
24572 TRAFO5_AXIS2_1[n]
24673 TRAFO5_AXIS3_1[n]
24574 TRAFO5_BASE_ORIENT_1[n]
24576 TRAFO6_BASE_ORIENT_NORMAL_1[n]
24580 TRAFO5_TOOL_VECTOR_1
24582 TRAFO5_TCARR_NO_1
Special functions: 3-Axis to 5-Axis Transformation (F2)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
Description
Axis assignment for transformation 7 [axis index]
Assignment geometry axis to channel axis for
transformation 7 [geometry no.]
Definition of transformation 8 in channel
Axis assignment for transformation 8 [axis index]
Assignment geometry axis to channel axis for
transformation 8 [geometry no.]
Definition of transformation 9 in channel
Axis assignment for transformation 9 [axis index]
Assignment geometry axis to channel axis for
transformation 9 [geometry no.]
Definition of transformation 10 in channel
Axis assignment for transformation 10 [axis index]
Assignment geometry axis to channel axis for
transformation 10 [geometry no.]
Offset vector for 5-axis transformation 1 [n = 0.. 2]
Position offset of rotary axis 1/2 for 5-axis
transformation 1 [axis no.]
Sign of rotary axis 1/2 for 5-axis transformation 1 [axis
no.]
Definition of pole range for 5-axis transformation 1
End angle tolerance with interpolation through pole for
5-axis transformation 1
Vector of base tool for activation of 5-axis
transformation 1 [n = 0.. 2]
Vector of kinematic offset in table for 5-axis
transformation 1 [n = 0.. 2]
Vector of kinematic offset for 5-axis transformation 1 [n
= 0.. 2]
Vector of kinematic offset for 6-axis transformation
2_3_1
Offset of focus of 1st 5-axis transformation with
swiveled linear axis.
Angle of 2nd rotary axis for the universal milling head
Vector for the first rotary axis and the first orientation
transformation. [n = 0.. 2]
Vector for the second rotary axis and the first
transformation [n = 0.. 2]
Direction of third rotary axis for general 6-axis
transformation
(Transformer type 24, 40, 56, 57)
Basic orientation for the first transformation [n = 0.. 2]
Tool normal vector for the first transformation [n = 0.. 2]
Tool vector direction for the first 5-axis transformation 1
TCARR number for the first 5-axis transformation 1
Data lists
5.1 Machine data
119