Siemens sinumerik 840D sl Function Manual page 579

Boundary conditions
3.3 Function-specific alarm texts
Please proceed as follows:
1. Create an INITIAL.INI back-up file.
2. Write a text file on an external PC containing the following lines:
3. Load this file to the NC.
4. Load the INITIAL.INI backup file to the NC.
After the next POWER ON, the voltages of the analog axes (maximum of 3) are displayed in
the GUD array standardized to a maximum of +/- 10 V.
3.3 Function-specific alarm texts
The procedure to be following while creating function-specific alarm texts is described in:
References:
/FB3/ Function Manual, Special Functions; Installation and Activation of Readable Compile
Cycles (TE01), Section: Creating alarm texts
14
%_N_SGUD_DEF
;$PATH=/_N_DEF_DIR
DEF NCK REAL ANALOG_AXIS_VOLTAGE[n]
M30
n = Number of analog axes
Special functions: Analog Axis (TE2)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0