Data Groups; Programming - Siemens sinumerik 840D sl Function Manual

2.3.1.2

Data groups

The data has been collected into data groups. Activation of data groups occurs via the axis-
specific machine data:
MD33060 $MA_MAINTENANCE_DATA (configuration, recording maintenance data)
Bit Value
0
1
2
2.4

Programming

2.4.1 Programming
The function is not programmable.
Special functions: Path length evaluation (W6)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
Activation of the following data: System variable / OPI variable
Total traverse path: $AA_TRAVEL_DIST / aaTravelDist
1 •
Total travel time: $AA_TRAVEL_TIME / aaTravelTime
•
Total travel count: $AA_TRAVEL_COUNT / aaTravelCount
•
Total traverse path at high axis speeds:
1 •
$AA_TRAVEL_DIST_HS / aaTravelDistHS
Total travel time at high axis speeds:
•
$AA_TRAVEL_TIME_HS / aaTravelTimeHS
Total travel count at high axis speeds:
•
$AA_TRAVEL_COUNT_HS / aaTravelCountHS
Total sum of jerks: $AA_JERK_TOT / aaJerkTotal
1 •
Travel time with jerk: $AA_JERK_TIME / aaJerkTime
•
Total travel count with jerk:
•
$AA_JERK_COUNT / aaJerkCount
Detailed description
2.4 Programming
9