Siemens sinumerik 840D sl Function Manual page 262

Detailed description
2.2 Curve tables
Figure 2-3
2.2.6 Activation/deactivation
Activation
The coupling of real axes to a curve table is activated through this command:
LEADON (<Following axis>, <Leading axis>, <n>)
with <n> =Number of the curve table
Activation is possible:
• In the part program
• in the definition of a synchronous action
Example:
...
N1000 LEADON(A,X,3)
...
42
Determining the minimum and maximum values of the table
; Axis A follows the master value X according to the rule of motions
defined in Curve Table No. 3
Special functions: Axis Couplings and ESR (M3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0