Powering On And Configuring The System; Power; Powering On And Configuring The Appliance - Oracle ZFS Installation Manual

4
C H A P T E R

Powering On and Configuring the System

Power

Powering On and Configuring the Appliance

This section provides instructions for configuring the primary network interface using the
pre-installed Oracle ZFS Storage command line interface (CLI). After you configure the
primary interface, configure the remaining system parameters using the browser user interface
(BUI) from any client on the same network.
Prerequisites
Refer to the
Complete the system cabling according to the
Gather the following information in preparation for configuring an Ethernet interface on the
storage controller.
IP address
■
IP netmask
■
Host name
■
Domain Name Server (DNS) domain name
■
DNS server IP address
■
Default router IP address
■
Password
■
If you will access the appliance through an administrative client, configure the administrative
client with the following settings:
8N1: eight data bits, no parity, one stop bit
■
9600 baud
■
Disable hardware flow control (CTS/RTS)
■
4
Installation section for detailed instructions to install your system in the rack.
Cabling Diagrams section.
161