Independent Key Transitions
Key source name display/key
snapshot buttons
Key delegation buttons
Independent key transition type
selection buttons
Independent key transition
execution section
To set independent transitions for the keyers on the M/E or PGM/PST bank,
use the independent key transition control block.
For an overview of the independent key transitions, see page 35.
Basic Independent Key Transition Operations
In the independent key transition control block, use the following procedure.
1
Select one or more of the delegation buttons [KEY1] to [KEY4] ([DSK1]
to [DSK4] in the PGM/PST bank), turning them on.
2
Select the transition type.
To fade a key in or out: Press the [MIX] button, turning it on.
To insert or delete a key using a dedicated wipe pattern: Press the
[WIPE] button, turning it on.
To insert or delete a key using a dedicated DME wipe pattern: Press
the [DME] button, turning it on.
If, in the Setup menus, you set insertion and deletion as independent
modes, make the settings for the next transition in the independent key
Independent key transition control block (standard type)
K-MOD
KEY1
KEY2
KEY3
KEY4
K-SS
EMBL
K-TR
K-SS
MIX
WIPE
DME
ENBL
STORE
KEY1
KEY2
KEY3
KEY4
ON
ON
ON
ON
AUTO
AUTO
AUTO
AUTO
TRANS
TRANS
TRANS
TRANS
Independent Key Transitions
311